Inspection of highly attenuating materials as CFRP and Fiberglass requires using low frequency transducers to improve penetration and signal-to-noise ratio. Also Air-Coupling techniques, Lamb-Wave Inspection and Long Range require low frequency arrays. 

All of our SITAU equipments are available in LF (Low frequency) version, to be used with arrays between 30 kHz and 2 MHz.

Main Features:

• Low frequency adapted pulser, with Single, Burst and Coded operation modes.
• Reception bandwidth from 30 kHz to 2 MHz.
• Programmable sampling frequency between 157 kHz and 40 MHz.
• Programmable gain up to 100 dB, with arbitrary TGC function.
• Pulse-Echo and Pitch-Catch (or through transmission) modes.
• Up to 16384 focal laws per image (Progressive Focusing Technique)
• Non-peak-loss data reduction algorithm and Electromagnetic Interference Filter (EMI)
• Libraries for Matlab, Labview and C++.

TECHNICAL FEATURES

Technical Datasheet

CONTACT:

Contact with DASEL