 |
Modular and Reconfigurable The key to success incustom solutions. |
AIR-COUPLED ULTRASOUND
The revolution in non-contact ultrasound systems, from a single channel to hundreds of channels.
-
-
Training
Personalized training courses. -
ENGINEERING
Feasibility study as a key of sucess.
-
ULTRASCOPE SERIE
ULTRASCOPE USB,all the power of a high-end system in the palm of your hand. -
DIFRASCOPE
Much more than a multi-channel TOFD sustem. -
AMPLUS-32
AMPLUS-32 is a broadband pre-amplifier fully compatible with ULTRASCOPE / DIFRASCOPE.
-
PHASED ARRAY SYSTEM
Phased array systems,based on the SITAU technology. -
GNR FILTER
See beyond structural noise no matter grain noise present on the material. -
AUTOFOCUS
Get the best image quality with a single click... no matter how complex the geometry is.
-
FULL PARALLEL PHASED ARRAY
Synthetic Aperture Techniques (SAFT), Full matrix capture (FMC), total focusing method (TFM), Sampled Phased array, can be implemented. -
GPU Development Kit
Complete your SITAU Phased-Array system with the power of GPU’s. -
AIRSCOPE SOLUTIONS
Air-coupled NDT solutions for compiste inspections.
-
AIRSCOPE MULTICHANNEL
Air-coupled NDT solutions for compiste inspections. -
AIRSCOPE PHASED ARRAY
Unique in the world ,Non coupling Phased Array system. -
Air-Coupled transducers
Wideband transducers from 25Khz to 2 Mhz. Focus and Non-focus.
-
Ultrasound Scanners
Fully compatible with ULTRASCOPE, DIFRASCOPE and SITAU products. -
Inmersion Tank
Wide range of immersion tanks for non-destructive testing in water bath. -
Ultraview,Ultrascan & TOFD view
Powerful software tools to easily cofigure the system parameters.
-
MotorMotion
MotorMOTION is a fully programmable steppermotor control unit, capable of simultaneously controlling up to 3 axes, with configurable acceleration ramp and micro-steps. -
Ultrasound- CALC, Phased Array-Wizard and TOFD-CALC
A series of handheld tools for NDT, based on Android Operating System.
Dasel sistemas - Ultrasound Technology
DASEL is a company specialized in the development of high-end ultrasound technology. We offer at the same time flexible solutions according to each client requirements. Therefore the quality level in our products has not been neglected. Quality is a commitment that DASEL applies in all production areas to maintain traceability of manufactured products. For this reason the company has been certified ISO 9001:2015 by Bureau Veritas in the equipments production and calibration.
DASEL develops all its products with a modular architecture and using high-density re-configurable devices (FPGAs). Given the high cost for new hardware development, this design philosophy allows to adjust our systems to many different applications, with the incorporation of new functions or specific algorithms with no need to upgrade the equipment electronics.
SUBSCRIBE TO NEWSLETTER
Last blog post
AEROSPACE EVENT IN SEVILLA
Andalusia celebrates the third edition of the "Aerospace and Defense Meetings Sevilla-ADM". The congress, to be held from 10 to 13 May 2016, already has registered 408 companies from 24 countries.
This event has become the most important aerospace event in Spain and as a key appointment for the strategic sector of Andalusia.
DASEL and TECNITEST be present at the third edition of the most important BtoB event dedicated to the aviation and space to be held in Seville from 10 to 13 May 2016 sector.
We will be happy to welcome you to our Stand D 16-18, where you can see and check the development of our inspection technology Ultrasonic Phased Array based technology and non-contact inspection system for air.
You can sign in on this link: http://meetings.bciaerospace.com/sevilla/2016/
Facebook News
Last Tweets
Latest industry news
Wind Power News & Analysis RSS Feed
Read the latest wind industry & renewable energy companies, policy, wind farm projects & technology news, analysis on Windpower Monthly
-
Storage developer buys into Texas wind
Glidepath Power Solutions is buying eight distributed wind projects with a combined capacity of 149MW near Amarillo in Texas.
-
'Up to 85GW corporate PPA demand through to 2030'
The renewable energy demands of the 1,000 biggest companies in the US could create a need for up to 85GW of corporate procurement through to 2030,...
-
Statkraft acquires UK onshore developer
Statkraft has acquired onshore wind developer Airvolution Clean Energy as part of its bid to have a 1.2GW renewables portfolio in the UK by 2025.
-
Goldwind to supply first Canadian site
Goldwind has entered the Canadian wind market with an order to provide 50 turbines for a project in Saskatchewan that its developer claims will...
-
German renewables levy to peak in 2021
The surcharge funding Germany's green energy expansion will rise in 2020 and peak in 2021, before falling as first-generation renewable power...
Industrial Scanners
Aerospace Inspection Solutions
Flaw Detectors
Ultrasonic Flaw Detectors
Phased Array
Guided Wave
Pulser-Receivers
Integrated Inspection Systems
Bar Inspection Systems
Tube Inspection Systems
NDT Systems Instrumentation
Advanced NDT applications
GLASSFIBER BROKEN FIBERS
GLASSFIBER UNBOND
RAILWAY STEEL BOLTS
CASTING INCLUSIONS
AUTOMOTIVE NODULARITY
Applications
Application Notes
Applications Support
PDF Library
Video Gallery
Software Downloads
Training Academy
Obsolete Products
ISO Certifications